The OCCUPATIONAL SAFETY AND HEALTH RISK ANALYSIS IN THE FRAMEWORK OF IMPROVING PRODUCTION SAFETY IN THE PRODUCTION AREA (Case Study at Gama Steel Solo)
ANALISIS RISIKO KESELAMATAN DAN KESEHATAN KERJA DALAM RANGKA PERBAIKAN PRODUCTION SAFETY DI AREA PRODUKSI (Studi Kasus di Gama Steel Solo)
DOI:
https://doi.org/10.47942/jimstek.v7i02.2083Kata Kunci:
Keselamatan kerja, HIRARC, Alat Pelindung Diri, Bahaya, RisikoAbstrak
Occupational safety and health (OHS) is a crucial aspect that must be considered in every industry, including production environments involving heavy machinery and complex processes, which are often the site of workplace accidents. OHS analysis is crucial for ensuring worker safety and security, as well as identifying areas for improvement. This study aims to analyze the implementation of occupational safety and health (OHS) in the production area of PT Gama Steel Solo using the Hazard Identification, Risk Assessment, and Risk Control (HIRARC) method. The results indicate that across seven main types of work in the production area, 34 potential hazards were identified, with 35 risks classified by risk level: 3 low risks, 9 moderate risks, 14 high risks, and 9 extreme risks. Based on the HIRARC analysis, several recommended risk control measures include engineering controls, administrative controls, and the use of personal protective equipment (PPE) in accordance with established standards. This study concludes that the HIRARC approach is effective in supporting companies to systematically identify hazards, conduct risk assessments, and provide a basis for decision-making/control recommendations to improve production safety.
Keywords: Work Safety, HIRARC, Personal Protective Equipment, Danger, Risk
Unduhan
Referensi
Akbar, P., Mulyojati, M., & Yuamita, F. (2023). Analisis Potensi Bahaya Kerja Pada Proses Pencetakan Pengecoran Logam Menggunakan Metode Job Safety Analysis ( JSA ). Jurnal Teknologi Dan Manajemen Industri Terapan (JTMIT), 2(2), 90–97.
Anwar, K. (2015). Identifikasi Bahaya, Penilaian Risiko dan Pengendalian Risiko pada Pekerjaan Tambang Belerang. 76.
Badan Standarisasi Nasional. (2019). OHSAS 18001:2007. 1–19.
Hakim, L., & Hidayat, A. S. (2018). The Effect of Job Stress and Job Satisfaction on Organizational Commitment. Indonesian Journal Of Business And Economics, 1(1), 110–119. https://doi.org/10.25134/ijbe.v1i1.1363
Menteri, T. K. (1996). Perturan Menteri Tenaga Kerja No. 5 Tahun 1996 Tentang Sistem Manajemen Keselamatan dan Kesehatan Kerja. Menteri Tenaga Kerja.
Mohammad Ikrar Pramadi, Hadi Suprapto, & Ria Rahma Yanti. (2020). PENCEGAHAN KECELAKAAN KERJA DENGAN METODE HIRADC DI PERUSAHAAN FABRIKASI DAN MACHINING. JENIUS : Jurnal Terapan Teknik Industri, 1(2), 98–108. https://doi.org/10.37373/jenius.v1i2.60
Rakhman, F., Andesta, D., & Waiusr, A. (2022). IDENTIFIKASI BAHAYA KECELAKAAN KERJA DI PT . TOSHIN PRIMA FINE BLANKING MENGGUNAKAN METODE JOB SAFETY ANALYSIS DAN HAZARD. JUSTI (Jurnal Sistem Dan Teknik Industri), 2(2), 222–230. http://dx.doi.org/10.30587/justicb.v2i2.3569
Republik Indonesia, P. (2012). Peraturan Pemerintah Republik Indonesia Nomor 50 Tahun 2012 Tentang Penerapan Sistem Manajemen Keselamatan dan Kesehatan Kerja (Issue 100).
Risk Management Guidelines Companion to AS/NZS 4360:2004. (2004). AS/NZS. (2004).
RTS.Gita Putri Enindra. (2024). Evaluasi Efektivitas Penggunaan Hirarc (Hazard Identification, Risk Assessment, And Risk Control Dalam Mengurangi Kecelakaan Kerja Pada Bagian Prosuksi Di Pt. Pertamina Rokan Hulu, Duri, Riau Tahun 2023. Oshada, 1(2), 35–40. https://doi.org/10.62872/ndkp4c39
Saputro, T., & Lombardo, D. (2021). Metode Hazard Identification, Risk Assessment and Determining Control (HIRADC) Dalam Mengendalikan Risiko Di PT. Zae Elang Perkasa. Jurnal Baut Dan Manufaktur, 03(1), 23–29.
Septian Purnama, D. (n.d.). ANALISIA PENERAPAN METODE HIRARC (HAZARD IDENTIFICATION RISK ASSESSMENT AND RISK CONTROL) DAN HAZOPS (HAZARD AND OPERABILITY STUDY) DALAM KEGIATAN IDENTIFIKASI POTENSI BAHAYA DAN RESIKO PADA PROSES UNLOADING UNIT DI PT. TOYOTA ASTRA MOTOR: Vol. IX.
Setia Budhi, A., Alvian, M. Y. A., & Rahmah, S. N. (2022). Analisis Potensi Bahaya Dengan Metode Hazop (Hazard And Operability Study). Jurnal Logistics & Supply Chain (LOGIC), 01(02), 49–58. https://doi.org/10.33197/jlscc.v1i2.983
Wijaya, A., Panjaitan, T. W. S., & Palit, H. C. (2015). Evaluasi Kesehatan dan Keselamatan Kerja dengan Metode HIRARC pada PT . Charoen Pokphand Indonesia. 3(1), 29–34.
